Automotive Tips

Automotivetip logo

2008 Mazda Furai: The Supercar That Never Reached Production

The radical Mazda supercar that never made it to production.

2008 Mazda Furai: The Supercar That Never Reached Production

Name: Mazda Furai
Debut: 2008 Detroit Auto Show
Engine: Three-Rotor Wankel
Specs: 450 Horsepower / 278 Pound-Feet

Mazda was still committed to the rotary engine in the late 2000s, even as the technology was becoming increasingly rare. The RX-8 remained the company’s rotary-powered sports car at the time, carrying on the spirit of the iconic RX-7. Then, in 2008, Mazda unveiled something far more extreme at the Detroit Auto Show: the Furai, a dramatic concept powered by a three-rotor Wankel engine. Its name translates roughly to “Sound of the Wind,” fitting for a machine built around speed and aerodynamics.

Built To Race

The Furai was never meant to become a road-going production car. Mazda developed the concept with racing in mind, with plans for it to compete in the American Le Mans Series. Its aggressive red-and-silver bodywork and familiar number 55 paid tribute to the legendary 787B that gave Mazda its historic Le Mans victory. Despite its competition-focused design, however, the Furai never made it to the starting grid.

2008 Mazda Furai: The Supercar That Never Reached Production

2008 Mazda Furai: The Supercar That Never Reached Production

2008 Mazda Furai: The Supercar That Never Reached Production

At its heart was a sophisticated three-rotor Wankel engine derived from the 20B used in earlier Mazda models. The engine was modified to run on E100 ethanol and produced 450 horsepower and 278 pound-feet of torque. The Furai was far more than a static show car, too. Mazda tested it at circuits including Laguna Seca and Buttonwillow, using the fully functional prototype to explore aerodynamics, performance, and future design ideas. Instead of becoming a race car, though, the Furai ultimately served as a rolling laboratory. Then disaster struck.

A Fiery Ending

Not long after its Detroit debut, Mazda loaned the Furai to the Top Gear team for testing and photography. During a session at Bentwaters Park, a former air base in the U.K., test driver Mark Ticehurst noticed smoke coming from the engine compartment. He managed to get out of the car safely, but the prototype was consumed by flames within minutes, leaving little of the once-stunning concept behind.

2008 Mazda Furai: The Supercar That Never Reached Production

2008 Mazda Furai: The Supercar That Never Reached Production

Mazda eventually returned the burned remains to its Advanced Design Studio in Irvine, California, where the Furai had originally been created. The company never attempted to rebuild the concept. In a 2013 interview with Road & Track, then-senior designer Carlos Salaff reflected on the loss, explaining that he had invested an enormous amount of himself into the project and that watching it destroyed was deeply painful.

Scroll to Top